Guide step by step----Recording from record or tape

**NeroExpert** Mon Mar 26, 2012 11:13 am

Now, there is no way to buy a brand new orginal nero 8 premium， but you can still by nero 7 Premium from us. The function fast the same just click here Automat of nerobbs.com for $10

In this tutorial you can follow the step by step procedure for recording a record or a tape on your hard drive with Nero SoundTrax.

The following requirements must be fulfilled:

A record player or cassette recorder must be connected to the input on the sound card.

You have started Nero SoundTrax

To record from record or tape proceed as follows:

then click the menu Toolbox > Wizards > LP to CD Wizard.
then click the menu Toolbox > Wizards>Tape to CD Wizard.
The window LP to CD Wizard, or Tape to CD Wizard, will then open with theRecording Console screen.
Audio input line menu select the input of the sound card.
then activate the Digital monitoring check box.
Recording Volume slider until the display in the Level meters is primarily in the yellow range.

If the level meter is predominantly in the red range, then the audio quality will be reduced.
activate the Pause recording until signal detected check box.
for instance because the cassette has reached the end of one side, then activate the check box Pause recording after 20 seconds of silence.
- Change target file button.The Save As dialog box opens.
- Save menu select the folder where you want to save the audio file.
- File Name input field.
- Save button.
button.
The system will start recording.
click the button.
Next button.
The Automatic Track Detection screen will appear.
Silence Threshold controller until the value is reached that indicates a pause based on the volume level.
Minimum duration of a pause field. Nero SoundTrax detects passages in the audio file and will automatically insert a pause.
in the Minimum duration of track input field.
Detect button.
The tracks in the recording will be detected automatically. The detected tracks will be displayed in the appropriate screen.
Next button.
The Noise Reduction screen will be displayed.
DeNoiser level slider until the desired threshold value for removing background noise such as hiss, crackle, and hum is reached.
DeRumble Level slider until the desired threshold value for removing low frequency signals that occur when recording LPs is reached.

The DeRumble filter can also delete bass frequencies that are part of the recording. Consequently do not set the threshold value of the slider too high.
DeClicker level slider until the desired threshold value for removing clicks that occur when recording LPs is reached.
DeCrackler level until the desired threshold value for removing background crackle that occurs when recording LPs is reached.
Preview button.
The recording will be played back with noise suppression.
Stop button to stop the preview.
Next button.
The CD Compilation screen will appear.
then activate the Burn project immediately check box.
activate the Launch Nero CoverDesignercheck box.
select the Pause option button.
select the Crossfade option button.
Finish button.

You have recorded or imported an LP or tape.

Mon	Tue	Wed	Thu	Fri	Sat	Sun
						1
2	3	4	5	6	7	8
9	10	11	12	13	14	15
16	17	18	19	20	21	22
23	24	25	26	27	28	29
30